As stainless steel fabricators, we’re frequently asked about the best way to clean stainless steel.
The great thing is the stainless steel is easy and easy to wash, and you will be rewarded with years of high quality and very good looks from the stainless steel product should you stick to a programme of regular, gentle cleaning.
The frequency of your cleaning regime is going to be set by the specific program (i.e., nationally, industrial or architectural sheet metal), but if you follow these few simple, easy steps, it’s simple to maintain your stainless steel surfaces appearing as good as fresh.
Regular cleaning

Wash with soap or mild detergent and warm water, then grow with fresh water. When cleaning brushed stainless steel, then follow the path of the gloss. A 1 percentage ammonia solution may be utilized, but bleach or chlorides must be prevented. You might even use a tiny quantity of alcohol or mineral turpentine. Are you looking stainless steel fabrication in Perth? No need to go anywhere else just contact Alfab Engineering. Then rinse with fresh water and warm. Stubborn marks, mild discoloration/rust    Employ a gentle, non-scratch lotion cleaner or chalk-based cleanser (no chloride options) having a soft, absorbent cloth or sponge. Rinse with fresh water and dry.

stainless steel fabrication in Perth
Localised rust stains these may be brought on by contact with mild/carbon steel and may be taken out by proprietary dyes, a 10 percent malic acid solution or an oxalic acid solution. Use only by the manufacturer’s directions and always test on a tiny, discreet surface initially and rinse well with clean water.
Tannin or coffee stains    Drink warm water with detergent, or even a way of baking soda (sodium bicarbonate). Rinse well.
Limescale    Drink warm water and 25 percent vinegar solution, then rinse with a solution of bicarbonate of soda and warm water or one % ammonia. Ultimately, rinse well with clean water.
Stubborn deposits    Utilize a non-scratching lotion or gloss, a nylon pad or some nice, abrasive glue to get rid of accumulated dirt. If needed, you may use an oven cleaner containing caustic soda.
DO
Do use a nylon brush or synthetic scouring pad
Do beverage in the same way as the grain
Do follow manufacturers’ guidelines and take security precautions
Do not use steel wool, metallic scourers or a metal scraper. These may harm the surface and make it corrode.
Do not use chloride-rich compounds or hydrochloric acid-based cleansing goods
Do not use bleach
Do not use cleaning cloths/scourers Which Have Been used previously on normal steel surfaces
Do not use abrasive powders
Regular cleaning of stainless steel must avoid stubborn stains out of building up but based upon the program; the alloy may become discolored. Careful attention and prompt actions should avoid critical staining, but should you have some queries regarding how to clean your stainless steel, we’d be thrilled to assist.

Leave a Reply

Your email address will not be published. Required fields are marked *